CHEMISTRY · IONIC BONDING
Follow along with your worksheet, one question at a time.
mrsajdak.com/salt
Photo: IvanSakhno, CC BY 4.0
START HERE
Photos: Ajhalls, public domain · Poyraz 72, CC BY-SA 4.0
START HERE
Photo A shows what happened when water touched a soft, silver metal. Photo B shows something you shake on your food. A yellow-green gas is part of this story too. How could these three things be connected?
OBSERVEWhat differences do you notice between Photo A and Photo B?
WONDERWhy might one substance be so dangerous while another is safe to eat?
PREDICTWill something made from dangerous ingredients always be dangerous too? Explain your reasoning.
The metal from Photo A, before the water.
The yellow-green gas. It is a poison.
Photos: Nefronus, CC0 · Larenmclane, CC BY-SA 4.0
DRIVING QUESTION
START HERE
The metal in Photo A is sodium. Sodium reacts violently with water, so it has to be kept away from it. The yellow-green gas is chlorine. Chlorine is poisonous, and it was used as a weapon in World War I. Photo B is table salt. Table salt is made of only two elements: sodium and chlorine.
Today, you will investigate what happens when sodium and chlorine react, what changes inside their atoms, and how other salts are built. At the end of the investigation, you will test sodium, chlorine and table salt side by side and return to the original driving question.
BEFORE YOU START
Is salt just sodium and chlorine mixed together? Or is it something new?
Photos: Nefronus, CC0 · Larenmclane, CC BY-SA 4.0 · Stock Catalog, CC BY 2.0
BEFORE YOU START
I can use the masses in a reaction to show that mass is conserved and to name the limiting reactant.
I can explain how moving electrons from a metal to a nonmetal makes ions, and use that to write a salt's formula and explain its properties.
BEFORE YOU START
1
Open mrsajdak.com/salt on your device.
2
Write your name, the date and your period on the worksheet.
3
Find the four tabs at the top of the lab. Each tab goes with one part of the worksheet.
4
Start on Tab 1. Do not skip ahead.
| Tab in the lab | Worksheet | Questions |
|---|---|---|
| 1. The demo | Part 1 | 1 to 5 |
| 2. One electron | Part 2 | 6 to 9 |
| 3. Other salts | Part 3 | 10 and 11 |
| 4. Test all three | Part 4 and Wrap it up | 12 to 14 |
Screenshot: mrsajdak.com/salt
TAB 1 · QUESTIONS 1 TO 5
Sodium and chlorine react to make salt. The reaction gives off heat and a yellow flame.
Chlorine gas is too dangerous for a classroom. So you will run it in the lab, in a sealed flask on a balance.
Photo: Ajhalls, public domain
PART 1 · TAB 1
1
Drag the Sodium on the sand slider. It sets the grams of sodium.
2
Press Add a drop of water to watch. Or press Skip to the end.
3
Read the Before and After columns.
4
Press New flask to go again.
5
Your runs keeps one row for each amount.
The slider goes from 0.1 g to 3.0 g.
The flask holds the same amount of chlorine every time.
Screenshots: mrsajdak.com/salt, Tab 1
PART 1 · QUESTION 1
1
Set the sodium to 1.0 g. Run it.
2
Sodium used is sodium Before minus sodium After.
3
Find the chlorine used the same way.
4
Add the two. Then read the Salt row.
5
Read the Balance row, before and after. What do you notice?
Chlorine before: 5.00 g.
Chlorine after: 3.20 g.
5.00 − 3.20 = 1.80
So 1.80 g of chlorine was used.
These are not your numbers. Use your own.
Screenshot: mrsajdak.com/salt, Tab 1
PART 1 · QUESTION 2
1
Run six amounts of sodium: 0.5, 1.0, 1.5, 2.0, 2.5 and 3.0 g.
2
After each run, copy Heat given off from the After column. It is not in Your runs.
3
Then press New flask.
4
At the end, copy Salt made and Left over from Your runs.
“Left over” is what is still in the flask after the flame goes out. Write what it is and how much.
These three rows are 0.3, 0.7 and 1.2 g. They are not in your table.
Screenshot: mrsajdak.com/salt, Tab 1
PART 1 · QUESTION 3
QUESTION 3
Compare 0.5 g and 1.0 g in your table. Then compare 2.0 g and 3.0 g.
What did the salt do each time?
QUESTION 3
Move the slider in 0.1 g steps. Run each one.
Watch Left over. Find the two amounts where it changes from chlorine to sodium.
Each run adds a dot. Look at the shape of the line once all six dots are on it.
This graph has only three small runs on it.
Screenshot: mrsajdak.com/salt, Tab 1
PART 1 · LEARN IT · 1 OF 4
In a reaction, atoms only change partners. Every atom in the reactants ends up in the products. So the mass stays the same.
Screenshot: mrsajdak.com/salt, Tab 1
PART 1 · LEARN IT · 2 OF 4
Burning wood seems to lose mass, because gases and smoke escape. A sealed flask lets nothing in or out.
Screenshot: mrsajdak.com/salt, Tab 1
PART 1 · LEARN IT · 3 OF 4
Each Cl2 molecule takes exactly two sodium atoms. If you add more of one reactant than the recipe needs, the extra is left over.
Photo: Larenmclane, CC BY-SA 4.0
PART 1 · LEARN IT · 4 OF 4
The reactant that runs out first is the limiting reactant. It decides how much product you get. The other one is in excess.
Screenshot: mrsajdak.com/salt, Tab 1
PART 1 · QUESTIONS 4 AND 5
QUESTION 4
Use limiting reactant to explain why the salt stopped growing.
Which reactant was limiting at 3.0 g? At 0.5 g? Your Left over row tells you.
QUESTION 5
Use your Question 1 balance numbers.
Use the word atoms to explain why the mass did not change.
The green number under the flask is the balance. The bars show the mass inside the flask.
Screenshot: mrsajdak.com/salt, Tab 1
TAB 2 · QUESTIONS 6 TO 9
Zoom in on one sodium atom and one chlorine atom inside that flame.
One electron moves. That makes two ions: atoms with a charge.
Photo: S k y r, CC BY 4.0
PART 2 · TAB 2
1
Click sodium’s gold electron. Or press 1. Move the electron.
2
Watch both atoms change size.
3
Press 2. Let them meet.
4
Press 3. Zoom out to the crystal.
5
Start over puts the electron back.
Blue dots are electrons. The gold one is the one that moves.
The number in the middle of each atom is its protons.
Screenshots: mrsajdak.com/salt, Tab 2
PART 2 · QUESTION 6
| Column | Where to look |
|---|---|
| Electrons by shell | The Atoms and ions box |
| Protons | Under each atom in the picture |
| Electrons | Under each atom in the picture |
| Charge | The Atoms and ions box |
| Radius (pm) | The Atoms and ions box |
Fill in the two atom rows first.
Then move the electron. The two ion rows show up.
A pm is a picometre. That is a trillionth of a metre.
Screenshot: mrsajdak.com/salt, Tab 2
PART 2 · QUESTION 7
QUESTION 7
Same as
Move the electron. Read the last line under each ion in the picture.
It names a noble gas with the same electrons.
QUESTION 7
2nd
Press Try to pull a second electron off Na⁺.
Write both energies. Divide the second by the first.
PART 2 · LEARN IT · 1 OF 4
Electrons sit in shells. The first shell is closest to the nucleus. An atom's size is set by its outermost shell.
Screenshot: mrsajdak.com/salt, Tab 2
PART 2 · LEARN IT · 2 OF 4
The + nucleus pulls on the − electrons. The closer the electron, the harder the pull, and the more energy it takes to remove.
Screenshot: mrsajdak.com/salt, Tab 2
PART 2 · LEARN IT · 3 OF 4
Neon and argon have full outer shells and almost never react. An ion with the same electrons has a full outer shell too.
Screenshot: mrsajdak.com/salt, Tab 2
PART 2 · LEARN IT · 4 OF 4
Pulling the electron off costs energy. The heat comes when the + and − ions pull together. A reaction that gives off heat is exothermic.
Photo: S k y r, CC BY 4.0
PART 2 · QUESTION 8
QUESTION 8
Smaller
Compare Electrons by shell for Na and Na⁺ in your Question 6 table.
Use the word shell.
QUESTION 8
Only one
Use your two Question 7 energies.
Where does the next electron sit?
PART 2 · QUESTION 9
1
Press 2. Let them meet. Now every bar shows.
2
Orange bars cost energy. Find the biggest one.
3
Blue-green bars give energy back. Find the biggest one.
4
Read the Net bar. It is for 58.44 g of salt.
5
Check it against Tab 1. Show your math.
40 ÷ 10 = 4
4 × 50 = 200
If 10 g gives off 50 kJ, then 40 g gives off 200 kJ. These are not your numbers.
Screenshot: mrsajdak.com/salt, Tab 2
TAB 3 · QUESTIONS 10 AND 11
Table salt is one salt. There are many more.
Each one is made the same way. A metal gives away electrons. A nonmetal takes them.
Photo: James St. John, CC BY 2.0
PART 3 · TAB 3
1
Pick a Metal and a Nonmetal.
2
Click a purple electron. Then click a nonmetal atom with an open spot.
3
Stuck? Read the red message. Press + to add an atom.
4
Keep going until every metal atom is empty and every nonmetal has 8.
5
The formula shows up when you are done.
Dashed circles are open spots.
Adding an atom puts all the electrons back. You can use up to 3 atoms of each.
Put the electrons back lets you try again.
Screenshots: mrsajdak.com/salt, Tab 3
PART 3 · QUESTIONS 10 AND 11
| Column | Where to look |
|---|---|
| Outer electrons | The Outer electrons box |
| Atoms needed | The two counters, once the salt is done |
| Formula | The box that shows up when you finish |
| Ion charges | Salts you made, in the Ions column |
A formula uses the smallest whole numbers. The lab tells you if you used more atoms than you need.
QUESTION 11
Compare each metal’s outer electrons with its charge. Do the same for the nonmetals.
Then predict calcium + chlorine. Do not use the lab.
Screenshot: mrsajdak.com/salt, Tab 3
TAB 4 · QUESTIONS 12 AND 13
Sodium, chlorine and salt share the same atoms.
Do they act the same? Run five tests on each one and find out.
Photo: IvanSakhno, CC BY 4.0
PART 4 · QUESTION 12
1
Pick a Substance: Sodium, Chlorine or Table salt.
2
Press a test. Wait for it to finish.
3
Read the sentence under the buttons.
4
Do all five tests. Then pick the next substance.
5
Check Your results. It should say 15 of 15 tests done.
A ? means you have not run that test yet.
The sentence tells you more than the grid does.
Screenshots: mrsajdak.com/salt, Tab 4
PART 4 · LEARN IT · 1 OF 4
A material conducts only if it has charged particles that are free to move. In a metal, outer electrons drift from atom to atom.
Photo: Nefronus, CC0
PART 4 · LEARN IT · 2 OF 4
In a solid, particles are held in place. They only jiggle. In a liquid, they slide past each other. Melting sets them free to move.
Screenshot: mrsajdak.com/salt, Tab 4
PART 4 · LEARN IT · 3 OF 4
Melting pulls particles apart. Cl2 molecules have no charge and hold on weakly. Ions with opposite charges pull hard.
Photo: IvanSakhno, CC BY 4.0
PART 4 · LEARN IT · 4 OF 4
In a mixture, the parts keep their own properties. In a compound, atoms join in a fixed ratio and the properties are new.
Photo: Poyraz 72, CC BY-SA 4.0
PART 4 · QUESTION 13
Go to Tab 2. Press the buttons until you see the crystal.
Look at the ions in the crystal. Can they move around?
What changes for the ions when the crystal melts?
Use the word ions in your answer.
The crystal from Tab 2. Purple is Na⁺. Green is Cl⁻.
Screenshot: mrsajdak.com/salt, Tab 2
WRAP IT UP · QUESTION 14
“Salt is a new substance. It is not just sodium and chlorine mixed together.”
Pick a number or a result from one tab. Your Question 12 table is a good place to look.
Pick one from a different tab. Try your Question 2 or Question 6 table.
Say what happened to the atoms and their electrons.
One grain of table salt under an electron microscope. It is a tiny cube.
Photo: Chhe, public domain
WRAP IT UP · BACK TO THE START
How can two dangerous elements make something safe to eat?
1Using your test results from Tab 4, explain how table salt is different from sodium and from chlorine.
2What happens to one electron when a sodium atom meets a chlorine atom? Use the word ions.
3The balance in Tab 1 read the same before and after. What does that tell you about the sodium and chlorine atoms in the salt?
4Sodium metal bursts into flame in water. The sodium in salt does not. Use what you learned about electrons and ions to explain why.
LAST CHECK
Name, date and period are on top.
All four tables are full.
Question 9 shows your math.
Question 14 has evidence from two tabs.
Photo: Matthias Süßen, CC BY 3.0